What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
Everyone will have his or her own theory with regards to No Hot Water — Water Heater Repair.
Several modern-day homes utilize an electric water heater for their heating system, due to its convenience and ease of use. Nonetheless, similar to any other electric devices, issues may occur with its usage, unexpectedly. It can be really frustrating to awaken to a cool shower as opposed to a warm one or having your bath with water that isn't hot enough or even also warm. Whatever the instance might be, water heater problems can be quite nerve-racking. The good news is, we have actually made a listing of possible solutions to your hot water heater concerns. There are a variety of elements that could cause most of these issues, it could be an issue with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you turn off the major power supply for security. Whatever the issue is, getting it fixed must not position too much of a concern if you comply with these steps:
Check Your Power Supply:
As standard as this may seem, it is really needed. Without sufficient power, your water heater will certainly not operate. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power issue. Check if the fuse is burnt out or the breaker tripped. If the breaker is the problem, simply transform it off and on once again. Replace any kind of damaged or damaged fuse. Check the appliance with power after these adjustments to see if it's now functioning.
Inspect the Burner in the Hot Water Heater:
If it's not a power problem, after that try looking into your heating element if it is still functioning. Check each of your heating elements to make sure the problem isn't with any one of them. If any of them is damaged, replace that component and after that inspect whether the hot water is back on.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't warm sufficient, you may require to inspect the temperature level settings on your top thermostat. Ensure the breaker is switched off prior to doing anything. Open the gain access to panel and also press the red button for temperature level reset above the thermostat. This must help heat up the water. Transform the circuit breaker back on and also check if the issue has been fixed.
Call A Professional:
If after replacing all damaged parts as well as resetting your temperature level, the water heater still isn't functioning, you might need to call an expert plumber for an expert point of view. The problem with your heating unit could be that the cold and hot taps have been switched over or it may be undersized for the amount of warm water required in your home. Whatever the situation might be, a professional plumber would assist address the problem.
Final thought
Hot water heater problems are not always significant. Most of them are due to minor problems like a blown fuse or damaged heating element. Replacing the malfunctioning components need to do the trick. Nevertheless, if you are still not able to address the problem, give a call to your closest plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We were brought to that report about No Hot Water — Water Heater Repair through a friend on our other blog. Do you know about somebody who is truly interested in the topic? Why not share it. Bless you for your time. Visit us again soon.
Schedule Services
Report this page